If you happen to have this issue, here we share some useful tricks for you to fix iTunes on Windows 10 not detecting/recognize iPhone, iPad or iPod. Trick 1: Restart Your Computer and Device If your Windows 10 PC can’t recognize your iPhone, first thing first is turn off your computer and device, and the turn on them to try again.
Ipod Classic Not Supported By Windows 10
- Fix iPhone not recognized by windows 10 1. Start with basic just try to unplug the Device (iPhone), unlock it, then reconnected it. Try a different USB port on your computer: Since your computer is not recognizing iPhone you can. Whenever an iOS device is connected to the computer, a.
- Discus and support Windows 10 won't recognize ipod nano as a device in Windows 10 Drivers and Hardware to solve the problem; Went thru iTunes support. Can't get windows to recognize my device 37302 Discussion in ' Windows 10 Drivers and Hardware ' started by sher817, Jan 12, 2016.
7.This will bring up a menu as shown in the picture. This should show an accurate capacity. If it reads something like 1 terrabyte then the hard drive/flash drive is bad. You have to be able to select FAT32 as the file system. If you can't then again the hard drive/flash drive is bad.
Allocation size should automatically be set to default. If you can't select an allocation size then the hard drive/flash drive is bad. Now select quick format, and click start. Once this has been done it should show up in iTunes as a corrupt iPod. Restore the iPod at this time and this should finally resolve the problem. If you are still encountering a problem visit and have us diagnose the iPod for free. Tried this with a 7th generation iPod Nano that I have been using since November.
When I set up iTunes on my laptop, finally, I was unable to connect my iPod to iTunes. I tried a bunch of stuff that Apple suggested but nothing worked. All it did was erase everything on my iPod and make it completely useless. ITunes doesn't recognize it still, even as a corrupt iPod, and now it just displays a lit screen that says 'DO NOT DISCONNECT.' I am currently living in Russia and haven't seen any apple stores where I'm at to take it to. I am so upset I use my iPod all the time, I just wanted to update playlists and music:((.
If it leaves those blank then you have one of 3 problems. They will go in order of most likely. Hard drive has gone bad. When you power up the ipod put your ear to the back and listen for a clicking noise. If you hear nothing you might be lucky, and it could be the cable.
If you hear a clicking noise the read arm is jammed and the drive is bad. If no sound is heard the hard drive cable could be bad or need to be reset. Only open and do this if you have some electronics experience. Try popping the connecters and replugging them back in this might fix it. Sometimes very rarely the board will just stop recognizing a hard drive. Again very rarely does this happen. Only way to prove this is to test the hard drive in another ipod.
Wish I could help you further but doubt i can unless you find yourself near Peoria Illinois.